KIA Kustom Vaporizer - Adjustable

Kia Vaporizer Overview

With many vaporizers on the market it is rare you see a vaporizer that tries to set itself apart from the rest. The KIA Vaporizer does that by making the vaporizer housing a super small and portable carrying case in strong and durable Aluminum. The KIA Vaporizer is about 8” long x 4” wide x 4” tall and includes a removable power cord so that it is cleaner looking when not in use.

The KIA Vaporizer is made in the United States and has a durable aluminum exterior that also doubles as a carrying case as mentioned above. The KIA Vaporizer is a healthy alternative over traditional smoking and is made of medical grade materials to make sure the only thing you are inhaling are safe and tasty vapors.

The ceramic heating element is fully encapsulated to ensure all electronics are kept separate from any heated air/vapor. This provides the safest means possible for vaporizing and inhaling your vapors. Additionally, the KIA Vaporizers offer fully colored glass chambers with the largest glass on glass fittings in the market making sure you get thick vapor hits every time. Additionally, The KIA Vaporizer contains the highest quality borosilicate glass made by Pyrex©. This is medical and pharmaceutical grade glass; the most durable glass available.

The KIA Vaporizer uses .999 pure silver solder and NO lead. This is a huge factor to consider if you’re vaporizing for health. Lead is poison!! The original KIA Vaporizer is set at 356° F for an optimal temperature for vaporizing and will ensure you never accidently combust your plant materials. For the customers that prefer total temperature control, the "Kustom" KIA Vaporizer allows temperature control from 0 – 450° F.

Online Manual

• Plug your vaporizer cord into the unit and then into a wall outlet.
  
• The red indicator light on The KIA Vaporizer will glow when the unit is on.
  
• Allow the unit to warm up for 1 to 3 minutes.
  
• The KIA "Kustom" Vaporizer can be adjusted from 0 - 450 degrees, best place to start is setting the dial to 12 o'clock and slowly move it clockwise from there.
  
• Grind up your plant materials.
  
• Load the Vaporizer bowl either by dropping a SMALL pinch into the bowl, or by inhaling a SMALL amount using the bowl as a vacuum.
  
• Insert only 99% of the glass bowl chamber into the vaporizer to avoid a tight seal and possibly getting stuck.
  
• If glass gets stuck, unplug unit and allow to cool, then pull straight back on the glass bowl. DO NOT use a twisting motion or parts may become damaged.
  
• Inhale deeply with a steady flow.
  
• Stir up the plant materials between each inhalation.
  
• Repeat until all blends are vaporized.
  
• KIA Vaporizer strongly recommends loading one hit at a time for ultimate taste and experience.
  
• Point the bowl into the trash and exhale to discard old plant materials.
  
• Completely cool down the unit before closing the lid.