Silver Surfer Replacement Heater Cover in Colored Glass

Please check out our comparison on Hands Free vs Standard Vaporizers if you are confused about what option is right for you.

This is a true OEM replacement heater cover for the Silver Surfer Vaporizer or SSV for short. The SSV Heater Cover is made by 7th Floor and is available in crystal clear glass in a standard glass end.

This heater cover for the SSV is considered “standard” meaning it is not Hands Free and has NO Ground Glass. This Silver Surfer heater cover will only work with Standard non ground-glass wands such as the Silver Surfer Vaporizer Standard whip/wand or our universal Standard Deluxe whip/wand.  Some people prefer the Standard fitting because it allows you to rotate the wand while inhaling making sure your blends are being heated evenly. Also because you have to hold your wand up to the Heater Cover (not hands free) you never have to worry about pulling too hard on the wand causing it to fall out from the Heater Cover (known to happen with Hands Free Heater Covers) First thing to remember when replacing your Heater Cover is that the Silver Surfer Vaporizer must be fully cooled down - the glass Heater Cover part gets very hot and will burn your fingers. Once cooled down, grab a small cloth (to protect your hands from any glass shards) and place an even amount of pressure on both sides of the SSV heater cover. Gently apply pulling pressure while slowly twisting back and forth - the SSV Vaporizer heater cover should pull off quite easily.

To put the new replacement heater cover back on, you will need to place the Silver Surfer Vaporizer heater cover over the heating element (the white ceramic rod) and slowly push the heater cover all the way down. That is it, you are ready to use your Standard SSV Vaporizer again.