Silver Surfer Replacement Heater Cover in Colored Glass

Please check out our comparison on Hands Free vs Standard Vaporizers if you are confused about what option is right for you.

This is a true OEM replacement heater cover for the Silver Surfer Vaporizer or SSV for short. The SSV Heater Cover is made by 7th Floor and is available in crystal clear glass in a ground glass end.

This heater cover for the SSV is considered “ground glass” meaning it is Hands Free. This Silver Surfer heater cover will only work with Hands Free ground-glass wands such as the Silver Surfer Vaporizer QC (quick change) whip/wand.  Some people prefer the Ground Glass fitting because it is Hands Free and when using your Silver Surfer Vaporizer with blends you won't have to worry about holding your wand up to the vaporizer.

First thing to remember when replacing your Heater Cover is that the Silver Surfer Vaporizer must be fully cooled down - the glass Heater Cover part gets very hot and will burn your fingers. Once cooled down, grab a small cloth (to protect your hands from any glass shards) and place an even amount of pressure on both sides of the SSV heater cover. Gently apply pulling pressure while slowly twisting back and forth - the SSV Vaporizer heater cover should pull off quite easily.

To put the new replacement heater cover back on, you will need to place the Silver Surfer Vaporizer heater cover over the heating element (the white ceramic rod) and slowly push the heater cover all the way down. That is it, you are ready to use your Standard SSV Vaporizer again.