|
Step 1
What you'll need (1) Ground Plant Material, (2) Cyclone Bowl, (3) Mini Whip, (4) and your Extreme–Q.
At this point turn on the Extreme Q Vaporizer to your desired temperature to pre–heat while you prep. Be sure to have your fans turned off at this time.
|
|
|
Step 2
Pack ground blends into the Cyclone Bowl. It is your choice to fill either half way between the bottom of the black rubber and the screen or all the way to bottom of the black rubber.
|
|
|
Step 3
Attach the Extreme Elbow Adapter from the Extreme Mini Whip into the black rubber end of the Cyclone Bowl.
|
|
|
Step 4
Place the packed Cyclone Bowl and Mini Whip onto the Heating Element Glass Cover inside the Extreme-Q.
|
|
|
Step 5
At this time you can turn the Extreme Vaporizer's Fan On to the highest fan speed to start creating vaporization.
Once the Fan is On; Attach the pre-made Extreme Balloon and wait for it to fill with vapor..
|
|
|
Step 6
Once the Extreme Balloon is full turn off your Extreme Vaporizer Fan and squeeze the end of the Extreme Mini Whip where the Mouthpiece is attached to un-attach the inflated Vapor Balloon.
Please be sure not to touch the glass parts of the Cyclone Bowl or the Heating Element Cover until the Extreme Vaporizer has thoroughly cooled down. You can pick up the Cyclone Bowl by the black rubber top piece, if you must before it cools down.
|
|
